Cordless Profile Metal Shears Li-Ion AK3520

$1,642.50

Cordless Profile Metal Shears Li-Ion AK3520

DRÄCO Cordless Profile Metal Shears Li-Ion AK3520 is a universal cutting device for the electrical installer, apparatus and control cabinet construction. The solution for cutting cable trays, cable tray lids, cable ladders, trapezoidal profile rungs, cable protection channels, stiffening UA profiles, wide span beams, cassettes, panels etc. The profile shears effortlessly cuts across angles and profiles.

The cutter works without sparks (saves the dangerous work with the angle grinder) and can therefore also be used in the building. No deformation of the profile and no burr formation.

Shear blade head with regrindable and exchangeable blades.

18 Volt Power

Unmatched Run-Time, Superior Durability

  • MD batteries last longer, think faster, and work harder than all other professional LITHIUM-ION batteries. Built to withstand the harshest environments, MD batteries deliver more work over the course of your day and over the life of the battery.
  • 4-pole motors, featuring rare-earth magnets, provide more power, more run-time, and longer life than any competitor motor. This provides smaller, lighter, and more capable tools that last longer on the jobsite.
    the batteries provide up to 40% more run-time, 20% more power and 50% more recharges than conventional lithium-Ion batteries. MD18 batteries deliver best in class performance in extreme job-site conditions, including temps as low as 0°F/-18°C. In regions where heat is also a critical factor, MD18 batteries operate 20% cooler than conventional lithium-ion batteries and offer fade free power with no memory effect.
  • Fully compatible with M18™ cordless products currently available, the new MD18 battery packs provide an instant upgrade to the performance, run-time and durability of the M18™ tools you already own.

Will cut up to 200 meters with one battery charge

Capacity:
Steel 400 N/mm²: 2.0 mm
Stainless Steel 600 N/mm²: 1.5 mm
Stainless Steel 800 N/mm²: 1.3 mm
Aluminium 250 N/mm²: 3.0 mm

Accessories:
Replacement Knife – 035201
Set of Jaws – BG35020
Knife-pin Set – BG35055
Charger CLi USA – 341811
Battery Li18/2 – 341820
Battery Li18/4 – 341840
Transport Box – 42861

Contact us to order accessories!

Also available as 5 pc. set in transport box, which includes:
1 Cordless Profile Metal Shears Li-Ion AK3520
2 Batteries Li18/2 & Li18/4 (2.0 + 4.0 Ah)
1 30 min. Charger CLi USA
1 Transport box

 

 

Description

Cordless Profile Metal Shears Li-Ion AK3520

DRÄCO Cordless Profile Metal Shears Li-Ion AK3520 is a universal cutting device for the electrical installer, apparatus and control cabinet construction. The solution for cutting cable trays, cable tray lids, cable ladders, trapezoidal profile rungs, cable protection channels, stiffening UA profiles, wide span beams, cassettes, panels etc. The profile shears effortlessly cuts across angles and profiles.

The cutter works without sparks (saves the dangerous work with the angle grinder) and can therefore also be used in the building. No deformation of the profile and no burr formation.

Shear blade head with regrindable and exchangeable blades.

18 Volt Power

Unmatched Run-Time, Superior Durability

  • MD batteries last longer, think faster, and work harder than all other professional LITHIUM-ION batteries. Built to withstand the harshest environments, MD batteries deliver more work over the course of your day and over the life of the battery.
  • 4-pole motors, featuring rare-earth magnets, provide more power, more run-time, and longer life than any competitor motor. This provides smaller, lighter, and more capable tools that last longer on the jobsite.
    the batteries provide up to 40% more run-time, 20% more power and 50% more recharges than conventional lithium-Ion batteries. MD18 batteries deliver best in class performance in extreme job-site conditions, including temps as low as 0°F/-18°C. In regions where heat is also a critical factor, MD18 batteries operate 20% cooler than conventional lithium-ion batteries and offer fade free power with no memory effect.
  • Fully compatible with M18™ cordless products currently available, the new MD18 battery packs provide an instant upgrade to the performance, run-time and durability of the M18™ tools you already own.
  • Will cut up to 200 meters with one battery charge

Capacity:
Steel 400 N/mm²: 2.0 mm
Stainless Steel 600 N/mm²: 1.5 mm
Stainless Steel 800 N/mm²: 1.3 mm
Aluminium 250 N/mm²: 3.0 mm

Accessories:
Replacement Knife – 035201
Serrated Heavy Duty Knife – 035271
Set of Jaws – BG35020
Knife-pin Set – BG35055
Metal Support Roller – BG10077
Charger CLi USA – 341811
Battery Li18/2 – 341820
Battery Li18/4 – 341840
Transport Box – 42861

Contact us to order accessories!

Also available as 5 pc. set in transport box, which includes:
1 Cordless Profile Metal Shears Li-Ion AK3520
2 Batteries Li18/2 & Li18/4 (2.0 + 4.0 Ah)
1 30 min. Charger CLi USA
1 Transport box

For more information visit the DRÄCO website:

https://www.dracotools.com/en/products/shears/ak-3520-li-ion/

Since 1951, DRÄCO has been a partner to the trade and industry, clients require the same quality and service we expect ourselves. Quality products, quality control, customer feed back and practical testing form the basis of our company philosophy. We offer practical advice and loyalty to our dealers.

Additional information

Weight5 kg
Dimensions50 × 40 × 20 cm
Delivery

approx. 4 weeks