Cordless Metal Stud Shear Li-Ion AK3515

$1,642.50

Cordless Metal Stud Shear Li-Ion AK3515

The DRÄCO Cordless Metal Stud Shear Li-Ion AK3515 is perfectly adapted to the needs of dry wall companies. Will cut C-, CW- and even UA- profiles.

The blades of these shears are especially for working stainless steel up to 1.3 mm (800N/mm²). This machine is particularly suitable for the discerning stainless steel processor (for example food service, catering equipment and large-scale kitchen, handrail and staircases, thermo products and chemical and pharma plants) and in the finishing process.

Due to the high capacity also ideal for shortening UA reinforcement ribs (2.0 mm metal stud). The cutter works without sparks (saves the dangerous work with the angle grinder) and can therefore also be used in the building. No deformation of the profile and no burr formation.

The assembly in the vise is made possible by means of flat sides on the shear head. Knives and jaws (side knives) can be reground.

MD18 Power

Unmatched Run-Time, Superior Durability

MD-LITHIUM batteries last longer, think faster, and work harder than all other professional LITHIUM-ION batteries. Built to withstand the harshest environments, MD-LITHIUM batteries deliver more work over the course of your day and over the life of the battery.

  • 4-pole motors, featuring rare-earth magnets, provide more power, more run-time, and longer life than any competitor motor. This provides smaller, lighter, and more capable tools that last longer on the jobsite.
  • The batteries provide up to 40% more run-time, 20% more power and 50% more recharges than conventional lithium-Ion batteries. MD18 batteries deliver best in class performance in extreme job-site conditions, including temps as low as 0°F/-18°C. In regions where heat is also a critical factor, MD18  batteries operate 20% cooler than conventional lithium-ion batteries and offer fade free power with no memory effect.
  • Fully compatible with all MD18 cordless products currently available, the new MD18 battery packs provide an instant upgrade to the performance, run-time and durability of the MD18 tools you already own.
  • Will cut up to 200 meters with one battery charge

Capacity:
Steel 400 N/mm²: 2.0 mm
Stainless Steel 600 N/mm²: 1.5 mm
Stainless Steel 800 N/mm²: 1.3 mm
Aluminium 250 N/mm²: 3.0 mm

Accessories:
Replacement Knife – 035151
Set of Jaws – BG35146
Knife-pin Set – BG35055
Charger CLi USA – 341811
Battery Li18/2 – 341820
Battery Li18/4 – 341840
Transport Box – 42861

Contact us to order accessories!

Also available as 5 pc. set in transport box, which includes:
1 Cordless Seam Metal Shears Li-Ion AK3515
2 Batteries Li18/2 & Li18/4 (2.0 + 4.0 Ah)
1 30 min. Charger CLi USA
1 Transport box

 

Description

Cordless Metal Stud Shear Li-Ion AK3515

The DRÄCO Cordless Metal Stud Shear Li-Ion AK3515 is perfectly adapted to the needs of dry wall companies. Will cut C-, CW- and even UA- profiles.

The blades of these shears are especially for working stainless steel up to 1.3 mm (800N/mm²). This machine is particularly suitable for the discerning stainless steel processor (for example food service, catering equipment and large-scale kitchen, handrail and staircases, thermo products and chemical and pharma plants) and in the finishing process.

Due to the high capacity also ideal for shortening UA reinforcement ribs (2.0 mm metal stud). The cutter works without sparks (saves the dangerous work with the angle grinder) and can therefore also be used in the building. No deformation of the profile and no burr formation.

The assembly in the vise is made possible by means of flat sides on the shear head. Knives and jaws (side knives) can be reground.

MD18 Power

Unmatched Run-Time, Superior Durability

MD-LITHIUM batteries last longer, think faster, and work harder than all other professional LITHIUM-ION batteries. Built to withstand the harshest environments, MD-LITHIUM batteries deliver more work over the course of your day and over the life of the battery.

  • 4-pole motors, featuring rare-earth magnets, provide more power, more run-time, and longer life than any competitor motor. This provides smaller, lighter, and more capable tools that last longer on the jobsite.
  • The batteries provide up to 40% more run-time, 20% more power and 50% more recharges than conventional lithium-Ion batteries. MD18 batteries deliver best in class performance in extreme job-site conditions, including temps as low as 0°F/-18°C. In regions where heat is also a critical factor, MD18  batteries operate 20% cooler than conventional lithium-ion batteries and offer fade free power with no memory effect.
  • Fully compatible with all MD18 cordless products currently available, the new MD18 battery packs provide an instant upgrade to the performance, run-time and durability of the MD18 tools you already own.
  • Will cut up to 200 meters with one battery charge

Capacity:
Steel 400 N/mm²: 2.0 mm
Stainless Steel 600 N/mm²: 1.5 mm
Stainless Steel 800 N/mm²: 1.3 mm
Aluminium 250 N/mm²: 3.0 mm

Accessories:
Replacement Knife – 035151
Set of Jaws – BG35146
Knife-pin Set – BG35055
Charger CLi USA – 341811
Battery Li18/2 – 341820
Battery Li18/4 – 341840
Transport Box – 42861

Contact us to order accessories!

Also available as 5 pc. set in transport box, which includes:
1 Cordless Seam Metal Shears Li-Ion AK3515
2 Batteries Li18/2 & Li18/4 (2.0 + 4.0 Ah)
1 30 min. Charger CLi USA
1 Transport box

For more information visit the DRÄCO website:

https://www.dracotools.com/en/products/shears/ak-3515-li-ion/

Since 1951, DRÄCO has been a partner to the trade and industry, clients require the same quality and service we expect ourselves. Quality products, quality control, customer feed back and practical testing form the basis of our company philosophy. We offer practical advice and loyalty to our dealers.

 

Additional information

Weight2 kg
Dimensions40 × 20 × 20 cm
Delivery

approx. 4 weeks